• 1

Gigabit fiber optic transceiver (one light and 8 electricity)

Short Description:

1 1.25Gbps optical port, 8 10/100/1000Mbps auto-adaptive electrical ports
Support MDI/MDI-X self-adaptation, full/half duplex self-adaptation
Single-mode dual-fiber SC interface mode, the optical fiber transmission distance can reach 20KM
Dynamic LED indicator, real-time display of the current working status of the device
Simple to use, plug and play, no setup required
Working temperature support -20℃~70℃
Exquisite iron shell design, support rack-mounted installation


Product Detail

Product Tags

product description:

This product is a gigabit fiber optic transceiver with 1 gigabit optical port and 8 1000Base-T(X) adaptive Ethernet RJ45 ports. It can help users realize the functions of Ethernet data exchange, aggregation and long-distance optical transmission. The device adopts fanless and low power consumption design, which has the advantages of convenient use, small size and simple maintenance. The product design conforms to the Ethernet standard, and the performance is stable and reliable. The equipment can be widely used in various broadband data transmission fields such as intelligent transportation, telecommunications, security, financial securities, customs, shipping, electric power, water conservancy and oil fields.

1 (2)
1 (3)
1 (2)
model CF-1028GSW-20
network port 8×10/100/1000Base-T Ethernet ports
Fiber port 1×1000Base-FX SC interface
Power interface DC
led PWR, FDX, FX, TP, SD/SPD1, SPD2
rate 100M
light wavelength TX1310/RX1550nm
web standard IEEE802.3, IEEE802.3u, IEEE802.3z
Transmission distance 20KM
transfer mode full duplex/half duplex
IP rating IP30
Backplane bandwidth 18Gbps
packet forwarding rate 13.4Mpps
Input voltage DC 5V
Power consumption Full load<5W
Operating temperature -20℃ ~ +70℃
storage temperature -15℃ ~ +35℃
Working humidity 5%-95% (no condensation)
Cooling method fanless
Dimensions (LxDxH) 145mm×80mm×28mm
weight 200g
Installation method Desktop/Wall Mount
Certification CE, FCC, ROHS
LED indicator condition meaning
SD/SPD1 Bright The current electrical port rate is gigabit
SPD2 Bright The current electrical port rate is 100M
extinguish The current electrical port rate is 10M
FX Bright Optical port connection is normal
flicker Optical port has data transmission
TP Bright The electrical connection is normal
flicker The electrical port has data transmission
FDX Bright The current port is working in full duplex state
extinguish The current port is working in half-duplex state
PWR Bright Power is OK

 

What are the indicators of optical fiber transceiver chip performance?
1. Network management function

Network management can not only improve network efficiency, but also guarantee network reliability. However, the manpower and material resources required to develop a fiber optic transceiver with network management function far exceed those of similar products without network management, which are mainly reflected in four aspects: hardware investment, software investment, debugging work, and personnel investment.

1. Hardware investment

To realize the network management function of the optical fiber transceiver, it is necessary to configure a network management information processing unit on the circuit board of the transceiver to process the network management information. Through this unit, the management interface of the medium conversion chip is used to obtain management information, and the management information is shared with ordinary data on the network. data channel. Optical fiber transceivers with network management function have more types and quantities of components than similar products without network management. Correspondingly, the wiring is complicated and the development cycle is long.

2. Software investment

In addition to hardware wiring, software programming is more important in the research and development of Ethernet fiber optic transceivers with network management functions. The development workload of the network management software is large, including the part of the graphical user interface, the part of the embedded system of the network management module, and the part of the network management information processing unit on the transceiver circuit board. Among them, the embedded system of the network management module is particularly complex, and the R&D threshold is high, and an embedded operating system needs to be used.

3. Debugging work

The debugging of the Ethernet optical transceiver with network management function includes two parts: software debugging and hardware debugging. During debugging, any factor in board routing, component performance, component soldering, PCB board quality, environmental conditions, and software programming can affect the performance of an Ethernet fiber optic transceiver. Debugging personnel must have comprehensive quality, and comprehensively consider various factors of transceiver failure.

4. The input of personnel

The design of ordinary Ethernet fiber optic transceivers can be completed by only one hardware engineer. The design of the Ethernet fiber optic transceiver with network management function not only requires hardware engineers to complete circuit board wiring, but also requires many software engineers to complete the programming of network management, and requires close cooperation between software and hardware designers.

2. Compatibility

OEMC should support common network communication standards such as IEEE802, CISCO ISL, etc., to ensure good compatibility of fiber optic transceivers.

3. Environmental requirements

a. The input and output voltage and the working voltage of OEMC are mostly 5 volts or 3.3 volts, but another important device on the Ethernet fiber optic transceiver - the working voltage of the optical transceiver module is mostly 5 volts. If the two operating voltages are inconsistent, it will increase the complexity of the PCB board wiring.

b. Working temperature. When choosing the working temperature of OEMC, developers need to start from the most unfavorable conditions and leave room for it. For example, the maximum temperature in summer is 40°C, and the inside of the optical fiber transceiver chassis is heated by various components, especially the OEMC. . Therefore, the upper limit index of the operating temperature of the Ethernet fiber optic transceiver should generally not be lower than 50 °C.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • 8FE+2GE WDM Media Converter (Single-mode Dual-fiber SC)

      8FE+2GE WDM Media Converter (Single-mode Dual-...

      8FE+2GE WDM Media Converter (Single-mode Dual-fiber SC) Product Features: Introducing a state-of-the-art 100 Gigabit 8 Optical 2 Electrical single-mode dual-fiber product designed to revolutionize your network infrastructure. Manufactured by Huizhou Changfei Optoelectronics Technology Co., Ltd., a trusted and reliable leader in communication equipment, this industrial Ethernet fiber optic converter is the ultimate solution for your outdoor fiber optic transceiver needs. Huizhou Changfei ha...

    • 2-port 10/100/1000M WDM Media Converter (Single-mode Single-fiber SC)

      2-port 10/100/1000M WDM Media Converter (Singl...

      2-port 10/100/1000M WDM Media Converter (Single-mode Single-fiber SC) Product Features: Huizhou Changfei Photoelectric Technology Co., Ltd. launched a cutting-edge card type 1 optical 1 electrical single-mode single-fiber 20KM converter In today’s fast-paced technology age, seamless connectivity has become a necessity for businesses across industries. As an innovative high-tech enterprise, Huizhou Changfei Optoelectronics Technology Co., Ltd. is well aware of this need and is committ...

    • 2-port 10/100M WDM Media Converter (Single-mode Dual-fiber SC)

      2-port 10/100M WDM Media Converter (Single-mod...

      2-port 10/100M WDM Media Converter (Single-mode Dual-fiber SC) Product Features: Introducing the Digital Fiber Converter: Revolutionizing Communication Technology Huizhou Changfei Optoelectronics Technology Co., Ltd. is pleased to present our latest innovation in communication equipment, the Digital Fiber Converter. With over a decade of experience in the industry, we are dedicated to providing cutting-edge solutions that meet the evolving needs of our customers. The Digital Fiber Converte...

    • 5-port 10/100/1000M WDM Media Converter (Single-mode Single-fiber SC)A-end

      5-port 10/100/1000M WDM Media Converter (Singl...

      5-port 10/100/1000M WDM Media Converter (Single-mode Single-fiber SC)A-end Product Features: Launched the ultimate optical connection solution: 1 optical 4 electrical Gigabit Ethernet transceiver and 5-port single-mode single-fiber optical converter Huizhou Changfei Optoelectronics Technology Co., Ltd., a leading provider of integrated transmission solutions, is proud to present our advanced range of photoelectric conversion devices. We focus on providing high-quality products and excellen...

    • 2-port 10/100/1000M Plug-in Media Converter (Single-mode Dual-fiber SC)

      2-port 10/100/1000M Plug-in Media Converter (S...

      2-port 10/100/1000M Plug-in Media Converter (Single-mode Dual-fiber SC) Product Features: Huizhou Changfei Photoelectric Technology Co., Ltd. launched an innovative high-performance photoelectric single-mode dual-fiber gigabit card transceiver. This cutting-edge product combines the reliability of optical transmission with the flexibility of electrical connections, making it ideal for a variety of networking applications. This add-in card transceiver features a 2-port design that provides ...

    • 9-port 10/100M  Media Converter (Single-mode Single-fiber SC)

      9-port 10/100M Media Converter (Single-mode S...

      9-port 10/100M Media Converter (Single-mode Single-fiber SC) Product Features: Introducing Enhanced Optical Transceivers: The Perfect Optical-to-Electrical Converter Are you looking for a reliable, efficient solution to your telecommunications needs? Huizhou Changfei Optoelectronics Technology Co., Ltd.’s 1 optical 8 electrical single-mode single-fiber B terminal is your best choice. As a professional manufacturer of industrial smart network managed switches, PoE switches, Ethernet s...